AEM CD-5 Carbon Digital Dash Display

$2,200.00

In addition to all of AEM’s CAN based products, AEM has available validated and confirmed CAN setups for the following 3rd party products. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted below and can be viewed on our Install Kits tab.
A 2-Way DTM Style termination receptacle plug will be needed to create an adapter harness if a Plug & Play Adapter Harness is not available. We supply DTM-style connectors that can be viewed on the the DTM-Style Connector kits page. The required 2-Way DTM-Connector Kit part number is 35-2620, and it can also be found on the Buy/Instructions tab.

 

Adaptronic M1200, M2000, M6000 ECUs
Adaptronic Modular series Plug-in ECUs
Autosport Labs, AnalogX 4 Channel Analog to CAN Module
BigStuff GEN4 Pro Xtreme ECUs
Bosch IMU 2-Axis Accel & Yaw Sensor
Edelbrock Pro-Flo 4 Electronic Fuel Injection
EMS EM-Tech EM70, EM80, EM140, EM160 & EM180 ECUs
FAST XFI 2.0 ECU
gaugeART 31-001, 8 Ch Analog Expansion Module
GM/Delphi MEFI-4b ECUs
Haltech Elite 550, 750, 950, 1000, 1500, 2000, 2500, 2500T ECUs
Haltech Elite VMS, VMS-T
Haltech Platinum Pro, Platinum Sport and Platinum Sprint ECUs
Haltech WBC1 & WBC2, 1 & 2 Ch CAN widebands
Holley HP EFI, Dominator EFI ECUs CD-7 to Holley EFI Plug & Play Adapter Cable Available
Hondata KPro4 and S300 V3 ECUs
KMS MD35 ECU
KMS Single Ch CAN wideband
KMS 4 Ch EGT Module
KMS 4 Ch Wheelspeed Module
KMS 2 Ch DBW Module
KMS Flex Fuel CAN Module
Life Racing F42, F88, F90 & GDI Series ECUs
Link G4+ based ECUs CD-7 to LinkG4+ ECUs Plug & Play Adapter Cable Available
MicroSquirt ECU
Megasquirt MS3, MS2, DIYPNP, MSPNP Gen2 ECUs
MicroTech LT-9C, LT-10C, LT-15C & LT-16C ECUs
Motec M1, M84, M400, M600, M800, & M880 ECUs
Motec PDM15, PDM16, PDM30 & PDM32 Power Distribution Modules
Motec PLM Lambda Module
Motec LTC, LTCD Lambda to CAN Modules
Motec E888, E816, CAN Expansion Modules
MSD AtomicEFI Throttle Body ECUs CD-7 to MSD Atomic TBI Plug & Play Adapter Cable Available
MSD GRID Programmable Ignition
PCS EGT-2000, 8 Ch EGT Module
Performance Electronics PE3 Series ECUs
ProEFI Pro128, Pro112, and Pro48 ECUs
RaceGrade TC8, 8 Ch EGT Module
RaceGrade 8 Ch and 15 Ch Keypads
Racepak V300SD, V500SD, Sportsman, G2X, & G2XPro Loggers
Racepak 220-VM-USM, Universal 4 Sensor Analog Modules
Racepak 220-VP-IRXXXX, IR Tire & Brake Temp Modules
Racepak 220-VP-JBXXXX, Exhaust Temp Modules
Racepak 220-VP-PTXXXX, Pressure Sensor Modules
Racepak 220-VP-PTXXXX, Wheelie Bar Force Modules
Racepak 220-VP-RIDEHTXX, Laser Ride Height Modules
Racepak 220-VP-TCXXXX, Thermocouple Modules
Racepak 220-VP-TRXXXX, Coolant/Air/Oil/Trans/Diff Temp Modules
Syvecs S6, S6+, S6I, S8, SDI & S12 ECU’s
Techmor AC-1-4, 4 Ch Analog Expansion Module
Techmor IR-1 Non-Contact IR Tire Temperature Module
Techmor AP-1, 16 Ch Aero Pressure Sensor Module
Techmor SG-1-C, Strain Gauge Amplifier Module
Vi-PEC i44-i88 ECUs CD-7 to Vi-Pec i44/i88 ECUs Plug & Play Adapter Cable Available
Zeitronics Zt-3 CAN AFR Meter and Datalogging System
Zeitronics ECA CAN Ethanol Content Analyzer

Categories: ,

Description

OVERVIEW
CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.

VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!
The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.
Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.

Reviews

There are no reviews yet.

Be the first to review “AEM CD-5 Carbon Digital Dash Display”

Your email address will not be published. Required fields are marked *